No. 310 Colored Cork Tackboards
 |
1/4" thick High grade linoleum resilient homogeneous tackable surface material shall be of natural materials consisting of linseed oil, granulated cork, resin binders and dry pigments, mixed and calendered onto a natural burlap backing. Uni-color shall extend throughout the thickness of material.
- No 310 - 1/4" colored cork - sheet material
- No 311 - No. 310 on 1/4" hardboard
- No 313 - No. 310 on 1/4" industrial grade particle board
|
|
|
#254 Markerboards on p3 ceramicsteel
 |
- No. 250 = p3 ceramicsteel markerboard on steel face sheet only
- No. 251 = No. 250 markerboard on 1/4" hardboard
- No. 252 = No. 250 markerboard on 1/2" hardboard
- No. 254 = No. 250 markerboard on 7/16" industrial grade particle board
- No. 255 = No. 250 markerboard on 1/2" fiberboard
For Low Gloss finish add "LG" to the part number
For Multi-Purpose add "VP" to the part number |
|
|
No. 300 Fabric-covered Surfaces Tackboard
 |
Woven fabric by Guilford of Main Textiles over cork or fiberboard provides a rich, warm alternative to natural cork or vinyl. The surface is easy to clean and maintain. Fabric carries a class A fire rating.
- No. 300F - Fabric on 1/4" cork - sheet material
- No. 301 - No. 300F on 1/4" hardboard (not recommended)
- No. 303 - No. 300F on 1/4" industrial grade particle board
- No. 305 - No. 300 fabric on 1/2" fiberboard
- No. 3058 - No. 300 fabric on 1/8" cork on 3/8" fiberboard
|
|
|
No. 330 Vinyl-covered Surfaces Tackboard
 |
Burlap patterned cloth supported vinyl over cork or fiberboard provides a durable tack surface. Vinyl is available in a variety of colors. Easily cleaned with soap and water.
- No. 330 - Vinyl on 1/4" cork sheet material
- No. 331 - No. 330 on 1/4" hardboard (not recommended)
- No. 333 - No. 330 on 1/4" industrial grade particle board
- No. 335 - Vinyl on 1/2" fiberboard (if fire rated fiberboard is required specify #335FR)
- No. 3358 - Vinyl on 1/8" cork on 3/8" fiberboard
|
|
|
No. 320 Natural Cork Surface Tackboards
 |
1/4" thick pure granulated natural cork. Tensile strength shall be accordance with ASTM F36. An economical approach to tack surfaces. Meets Military Specification MS-MIL-C-15116-C Type II.
- No 320 - 1/4" thick natural cork - sheet material
- No 321 - No. 320 on 1/4" hardboard (not recommended)
- No 323 - No. 320 on 1/4" industrial grade particle board
- No 3258 - 1/8" thick natural cork on 3/8" fiberboard (not shown)
|
|
|
#204 Chalkboards on p3 ceramicsteel
 |
- No. 200 = p3 ceramicsteel chalkboard on steel face sheet only.
- No. 201 = No. 200 chalkboard on 1/4" hardboard.
- No. 202 = No. 200 chalkboard on 1/2" hardboard.
- No. 204 = No. 200 chalkboard on 7/16" industrial grade particle board.
- No. 205 = No. 200 chalkboard on 1/2" fiberboard
|
|
|
